Training Wheel Hero
Join Date: Oct 2012
Thanked 0 Times in 0 Posts
Feedback Score: 0 reviews
OK, since I could not find the info I wanted I went ahead and bought the kit.
The bolts are 150mm long (head included) and the thread 35mm long. They are 10.9 hardness.
The small bushing are 13mm long, 24mm diameter on top (2mm thick) and the lower part is 20mm diameter. The hole in the middle is 12mm.
The single rod needed is 34mm long and 20mm in diameter. Hole as always 12mm
Then the actual spacer is 50mm long with a 29mm smaller diameter (21mm) part and then changes to 28mm diameter and expanding finally to 39mm.
The smaller spacer is 20mm long, 24mm small diameter and 39mm big diameter. The "tulip" starts expanding on both at approx. the last 10mm on the top.
Hope this would be of help to anyone else interested. Pictures coming up...