I bought a set of the 8000k white/white halos with red demon eyes and LED strips. I was wondering if you were going to do an install thread for these or should I just follow the 07 thread instructions? Is there any difference at all between them regarding wiring?
Also roughly how long should it take for these to reach Australia?
Thank you for the order,
The install process is 90% the same, but i will be making a separate how to for the installation. I will try to write up the how to some time towards the end of the week.
wiring is exactly the same, just the plugs are different on the 03-06 and i am providing the H7 plugs with the kit.
Your order will be shipped tomorrow, and USPS Priority mail is usually 10-14 days to Australia.
You will get a tracking number tomorrow.
so for the extra charge, I would have my head light with wires hanging out that i can plug into stock plugs and be done or do it need to tap into wiring?
im also considering maybe simple projectors only with demon eye. i really only care about dual low and sual highs with bright lighting.
How much for this projector/hid/demon only setup to plug into factory harness?
The stock H7 plugs come with the kit, so there is no splicing your original harness needed.
I can install the demon eyes on my end and also do the wiring harness plug and play, using 2 H7 plugs that will simply plug into your factory plugs.
since you have demon eyes you will need 1 on/off switch to turn off the headlights, since you cannot see the demon eyes unless the hid's are off.
so complete projector kit is $269 with white angel eyes, $40 for demon eyes, 10$ for 1 on/off switch, $75 to install the demon eyes, and do the wiring plug and play.
so after you install the projectors into the headlight, just plug in all the wires, place the ballasts and you are done.