Join Date: Apr 2006
Location: Milwaukee Area
Thanked 2 Times in 2 Posts
Feedback Score: 7 reviews
No fuel prime and no spark
Ok let me start off by saying that I am not troubleshooting a 600rr, but the bike is very similar. (06 1000rr) I am very desperate to figure out the problem, so ANY help will be greatly appreciated. I tried posting on 1000rr.net but have had no help, please 600rr brothers, prove to me for the 100th time why this site is the best!
The information: I bought the bike wrecked. I completely disassembled it and put it back together. It didn't run when I took it apart because I didn't have the headlight harness. I now have it back together and I cannot get it to spark or prime the fuel system. First I bought a new battery because the one that was in it was completely dead.
I put a multimeter on the negative battery terminal to the grounding spot on the frame that has two grounds going to it. It was good.
I tested all of the relays, and they all tested good. (I did this by following the instructions in the service manual.) You can hear it click when you flip the kill switch.
The kill switch is good and was verified with the multimeter.
I jumped the outer wires for the bank angle sensor.
There are no blown fuses.
I replaced the fuel pump because that tested bad. I jumped it and it wouldn't turn on. I also checked for voltage going to it and there was none when I turned the key. New pump when jumped turned on, but still no voltage to it.
The MIL does not blink.
This isn't making sense to me. I am about to buy a different ecm and wiring harness. I am hoping that it is something simple but it's not looking that way. Sorry for the long post, and thanks in advance!
03 RVT 1000R RC51 SP2