Honda CBR 600RR Forum banner

oil drain plug spins

2K views 7 replies 5 participants last post by  raider4life22 
#1 ·
So I'm changing my oil for the first time. I turn my ratchet with a little force and it breaks loose. But now it will not spun off or tighten back up. What the hell do I do? Anyway get the bolt out so I can change the oil? Any help is appreciated
 
#6 ·
If you have indeed accidentally turn it clockwise and strip the bolt; drill a small hole (like drilling for safety wire)

Put a look of wire around it, get a friend to pull it out while you turn the bolt ANTI-clockwise.

Pray and hope that you have cracked your pan. (someone in the forum did it and had a long crack along the bottom of the oil pan)

If you're pan is already cracked, take off the bolts that are holding the oil pan to the engine block and replace the whole thing with a new one.

Remember righty tighty, lefty loosey
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top