Honda CBR 600RR Forum banner

LSL "Crash Pad" Frame Sliders Through Spiegler

2K views 11 replies 7 participants last post by  SketchyStunts 
#1 · (Edited)
Anyone ever try these/seen these/know anything about them?

I know woodcraft and shogun are the favorites, but these looks like they incorporate a new technology idea in them. Look pretty sweet too. My bike's an 09RR if that helps with anything...these are for 09-11's.



http://stores.sportbiketrackgear.com/Detail.bok?no=6382
 
See less See more
1
#6 · (Edited)
I know the 07/08's mount on the cases. I'm not sure if they would have changed the design for the 09's+ as they are the same frame.

'07 LSL install.
http://www.600rr.net/vb/showpost.php?p=1804952&postcount=18

On the Spiegler website the sliders for the 09+ are about 1/2 the price as the 07/08. This could be due to not needing/having and mounting brackets. However under the "position" column it is listed as motor just as it is on the 07/08s. Give them a ring and find out.

http://www.spieglerusa.com/cfm/FrameSliders.cfm
 
#9 ·
I run them on our shop bike. Absolutely great sliders, however, they do mount several models to the engine covers and those models I wouldn't recommend. Little 8mm bolts are not designed to absorb the energy of a crash imo. All the other models (most all of them) that attach to the normal frame slider/engine mount points are absolutely great frame sliders.
 
#11 ·
They only mounted to the cases because everyone wanted no cut frame sliders. Now that the cases are covered on the 09+ they figure if you have to drill a hole anyways, might as well anchor it to the engine bolts properly. I know when I look for sliders for my 07 I always look at 09+ options
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top