I went from the Rizoma to the G craft and finally switched over to the HRC clear tube kit clamp set up way cheaper than the reservoirs , just as effective and looks great and that right before I sold the bike
Anyway HRC kit parts needed are:
17370-419-700 for the plug on the tube
95002-02120 is the clip to hold the plug in place
reuse your clamp from the old tube instead of buying the HRC one
Get the tygon 2075 tube from http://kurveygirl.com/shop/index.php...8fe7d695d9c11f
You can reuse the elbow joint and zip tie the tube to the brake line or you wanna behind the, or get the straight elbow joint and that will put the tube in a straight up position the part number from Honda is : 43503-MB2-006
I had 2 different G-Craft on my '06 and both required bleeding way more than they should have. Other people told me they had the same issue. Moeman has the right idea above, works great and never let me down on the track.
__________________ The world doesn't revolve around me, but it certainly knows I'm here.
2010 Aprilia RSV4 Factory
The Following User Says Thank You to TheX For This Useful Post: