Putting the 600RR back together, help needed!

[JerseyCBR]

So I just got my nose cone back from the spray shop. Began putting on the nose cone last night when I realised I had a problem. I have this screw that will tighten because whatever originally allowed it to tighten has been dropped or lost in some way.

I now have no idea what this screwed into or where to get a replacement, i've tried looking at an exploded diagram of the 'upper-cowl' as it's known but it only shows the front side, the link below is an exploded diagram of the light housing but also doesn't show what this particular screw holds on too.....

It's item number 10

http://www.bikebandit.com/houseofmot...2055#sch407020

Could anyone devulge some information, part number, anything on this bracket / nut whatever it is i'm looking for?

Literally can't explain what or where the screw meets the fairing, anyone who's taken their nose cone off would / should know exactly what I mean though. Sorry I can't be any clearer!

The circles show where the gold retaining nut should be that usually doesn't fall out and the arrows show where the retaining clips should be. They are the small gator style clips that you can remove which is probably your problem.

[JerseyCBR]

Originally Posted by infinate719

The circles show where the gold retaining nut should be that usually doesn't fall out and the arrows show where the retaining clips should be. They are the small gator style clips that you can remove which is probably your problem.

Nailed it on the head, thanks alot man!

Really appreciate it!

No problem. Glad it was an easy fix.