You can see all the available options on our website www.bkmoto.com
just decide what you want installed into your headlight and pm me or send me an email sales@bkmoto.com with the options you want installed.
__________________ Want Projectors? Complete 600RR HID Projector Kits and retrofit service. Click Here for more info UV Filtering Quartz Glass plug and play 35w and 55w premium hid kits. www.bkmoto.com
Ordered my kit on the weekend hopefully will be here sometime soon. I have access to a rapid prototype machine at work so i'll be testing out some supplementary stuff on this kit once i get the parts and can measure the real estate available.. Maybe design some interior features for halos or something.. Has anyone tried to paint the plate white? Curious how this will look...
Sent from my DROID RAZR using Motorcycle.com Free App
when the bike is all assembled, no.
if you remove the headlights from the bike, and look closely at the seam where you opened the headlight to install everything, then there are usually a few very small nicks from a screw driver that was used to pry the headlight open.
with my installs you can barely see them, but that of course depends who is doing the install, and how careful the customer/installer is.
__________________ Want Projectors? Complete 600RR HID Projector Kits and retrofit service. Click Here for more info UV Filtering Quartz Glass plug and play 35w and 55w premium hid kits. www.bkmoto.com
Thanks man where did you buy yours from and did you have to take your old headlight out to instal the new one?
Sent from my DROID RAZR using Motorcycle.com Free App
I didnt buy mine, i am the vendor who sells these lights
There are 3 ways you can get these lights
least expensive:
Goto my website www.bkmoto.com and order the kit, which has all the components that you need to install into your existing headlights, by opening them up and installing everything inside.
More expensive and easier way: Mail me your headlights and i will install everything into your headlights and send them back assembled and plug and play. Labor costs typically $200-250 depending on how many options you get, such as halos, led strips etc... + the cost of the kit
Most expensive: and easiest way, i can provide new headlight assemblies and install everything into the new headlights and send you a brand new complete set, so you simply swap old headlights for new. for this you need to add the cost of the kit + labor + $150 for new aftermarket headlight assemblies.
visit our website www.bkmoto.com to see all the available projector kit options, or just let me know how you want your headlights to look like.
__________________ Want Projectors? Complete 600RR HID Projector Kits and retrofit service. Click Here for more info UV Filtering Quartz Glass plug and play 35w and 55w premium hid kits. www.bkmoto.com
Is there any reason why the halo isn't positioned at the front (flat surface) of the shroud? Is there a clearance issue or is it just to maximize the diameter of the ring? Also wasn't a big fan of swapping to the CBR rubber grommet backing once i took a look at further (ordered it on the kit but dont think i will end up using it). So i modeled up an end cap that will fit the housing, hopefully will be able to run a prototype during the week sometime to see how if fits. Still need a hole in the back for the cables but ill figure that out once i receive my kit..
Is there any reason why the halo isn't positioned at the front (flat surface) of the shroud? Is there a clearance issue or is it just to maximize the diameter of the ring? Also wasn't a big fan of swapping to the CBR rubber grommet backing once i took a look at further (ordered it on the kit but dont think i will end up using it). So i modeled up an end cap that will fit the housing, hopefully will be able to run a prototype during the week sometime to see how if fits. Still need a hole in the back for the cables but ill figure that out once i receive my kit..
The front halo is not positioned at the front edge of the shroud because this brings the very fragile ring very close to the lens, and leaves very little room for adjustment or error. so i am using a bigger halo ring that goes over the shroud and not at the front of the shroud, and this makes everything easier to fit.
The stock plastic caps no longer fit since the projector bulbs stick out a little further. so the best solution that i have found so far is the 03-06 cbr600rr dust caps. since they are rubber and are deeper.
If you have access to the design/machinery to make better, plastic oem style extended caps, that would be great.
__________________ Want Projectors? Complete 600RR HID Projector Kits and retrofit service. Click Here for more info UV Filtering Quartz Glass plug and play 35w and 55w premium hid kits. www.bkmoto.com
Just finished my mod. Did the side emitting LEDS with dual halos (blue 85mm white 95mm)
Like everyone says, hiding/wiring is the worst part. PITFA
But when I turned them on for the first time i think i felt a single tear roll down my face. It was the most beautiful thing ever. I could post some pics but theres already a ton just like them. For anyone considering doing this, just know that not one photo on here does it justice. The LEDs look ...so... good. In the last 48 hours I've had three total strangers walk up to me in parking lots and compliment the headlights. No regrets. Oh also the HIDS werent aimed low enough at first. I pissed a lot of people off. Theyre bright as hell. Thanks borka
Just finished my mod. Did the side emitting LEDS with dual halos (blue 85mm white 95mm)
Like everyone says, hiding/wiring is the worst part. PITFA
But when I turned them on for the first time i think i felt a single tear roll down my face. It was the most beautiful thing ever. I could post some pics but theres already a ton just like them. For anyone considering doing this, just know that not one photo on here does it justice. The LEDs look ...so... good. In the last 48 hours I've had three total strangers walk up to me in parking lots and compliment the headlights. No regrets. Oh also the HIDS werent aimed low enough at first. I pissed a lot of people off. Theyre bright as hell. Thanks borka
Enjoy your new headlights.
post some pictures when you get a chance, ill add them to my website gallery.
__________________ Want Projectors? Complete 600RR HID Projector Kits and retrofit service. Click Here for more info UV Filtering Quartz Glass plug and play 35w and 55w premium hid kits. www.bkmoto.com
Any discounts going on right now, like 15% off? =p
Looking at a $361 kit...cant quite pull the trigger.
Right now we offer 600rr.net members a $20 discount on the kit and free usa shipping. use coupon code "600rrnet20" in your shopping cart, before checkout.
Quote:
Originally Posted by Raj24v
Borka is normally quite good and offers discounts etc when there is demand.
I think he's due another group buy though....
We had out last group buy in June, with a very good turn out.
So i think if there is enough demand i wont be apposed to set up another group buy.
__________________ Want Projectors? Complete 600RR HID Projector Kits and retrofit service. Click Here for more info UV Filtering Quartz Glass plug and play 35w and 55w premium hid kits. www.bkmoto.com
same terms as our last group buy, 1-10 orders 10% off and 15+ orders 15% off the total and FREE USA SHIPPING.
I will make a new thread for the group in the next few days.
__________________ Want Projectors? Complete 600RR HID Projector Kits and retrofit service. Click Here for more info UV Filtering Quartz Glass plug and play 35w and 55w premium hid kits. www.bkmoto.com
