Great descriptions and photos of what to do. I got mine all set up last night and working like a charm. Thanks all! I don't recall if anyone mentioned it but since the connectors for the relay slide right into the wires from the harness, I used some shrink tubing and it looks a lot better than electric tape :)
While this is up top, I'll share my '04's, local place claimed plug-n-play, maybe for '05-'06 but not my 2004. Simple, de-pinned the factory harness, and the plug on the relay, and installed like such. Of course with heatshrink over the connections, but here's the rough version, I ziptied it to the other relays. Done this way it's reversible if ever need be, and no bastardizing OEM wiring-
__________________
'04 CTB 600RR
Quote:
Originally Posted by Jeremy Clarkson
Speed never killed anyone, suddenly becoming stationary, that's what gets you.
While this is up top, I'll share my '04's, local place claimed plug-n-play, maybe for '05-'06 but not my 2004. Simple, de-pinned the factory harness, and the plug on the relay, and installed like such. Of course with heatshrink over the connections, but here's the rough version, I ziptied it to the other relays. Done this way it's reversible if ever need be, and no bastardizing OEM wiring-
That is exactly what I did on my '05 bro. Not having to cut into anything factory does wonders for the soul!
While this is up top, I'll share my '04's, local place claimed plug-n-play, maybe for '05-'06 but not my 2004. Simple, de-pinned the factory harness, and the plug on the relay, and installed like such. Of course with heatshrink over the connections, but here's the rough version, I ziptied it to the other relays. Done this way it's reversible if ever need be, and no bastardizing OEM wiring-
Hey guys just did this mod last night because i was waiting for my pin connectors to come in.
I ordered these from ebay and they fit perfectly. the female connectors are not 100% the same as the ones on the oem Honda harness but they still fit into the female aftermarket harness. I just got a costume led relay and cut the ends off and crimped the two male wires on to the ebay male harness and it looks nice and clean and there water proof too.
Here is the link and I will post pics when I can.
p.s. I slide the waterproof seals over the oem Honda harness wires they stretch little but the are still waterproof.
Came across this thread while replacing the old "boxing gloves" with led's up front. Couldn't have done it without this thread. Hardest part was getting the darn wires out of the block. This thread was so helpful I joined rr.net Thanks!
