Looking for a 08 Two bros slip on, and k&n map willing to make a donation for the map. Can anybody help me out? I live in northern MI and the only tune shop around me does road bikes. I called them up and they dont me they wont mess with it. PM me If u can help me out thanks
I could use one for my 07 with a two brothers slip on and BMC air filter. Living up here in AK kind of hinders my ability to get a good map made. The only tuner up here is at the harley shop and he's only ever done 2 CBR's. He's mostly a harley tuner. The map from Power Commander seems to run a bit rich on my bike.
If you're running rich, try the pair-valve delete mod. May or may not fix problem fully, but it wouldn't hurt either.......pm me results if you don't mind
Maybe since I'm only familiar with what it took to get my s2000 tuned that makes me feel a little iffy, but I would never run another persons tuning map since every situation is different. I ran someone's VAFC II settings for the same exact mods and my car ran like crap.
Additionally (and I'm sure its way different with our Pciii's) but my k-pro tune was almost $600 and took about 4-5 hours to do, not to mention waiting almost 2 months to get an appointment. why would I give that away for free?
What does it cost to get aour bikes dyno'd and a map created on the pciii anyway?
it cost me about 400 to get a custom map for my bazzaz here in cali (woulda been $350 but coolant clamp busted doh)
Does anyone have a map for cbr600rr 07 Arrow Twin Replica Full Exhaust System and filter pc3?
"I try to have a different relationship with the bike. I don't give it a name, but I always speak with it. I don't know if the other riders do the same. This is not only a piece of metal - there is a soul." - ''Valentino Rossi''
Plz help I have a 2003 cbr 600rr with akraprovic slip on and stock air filter and can not find this map on dyno jet can any one tell me where to get it are if any one has the same map maybe helping me out I would be so grateful are is there another map I can use in the place of it off the site
Most of the people in this thread probably lost power when they added the PC3. Know what you're buying, and why you're buying it. Get the mapping done the right way.
Once you put someone's "custom" map in your PC3 you now have a vague guess at the mapping for your bike.
Yes, I know it's an old thread but people need to get educated on how to use this type of device.
Here's the problem.
Not a lot of shops know how to do a proper dyno tune.
Then in my case. I haven't a firkin clue where to start looking for a shop that can local to me.
That's why I'm on here searching rather than the dynojet site. Cause those maps do exactly what u mentioned.
So all I want is a basic map that smooths out the stock throttle and maybe just maybe gimme 3-5 hp.
That's not too much to ask. But people wanna be misers with their maps.
I would've gone bazzaz but I'm resisting the urge to spend big on This bike. Very difficult stuff man. It's so easy to go crazy because I know how to hook these Hondas up. But I'm fighting it.
[CENTER][COLOR=gray]No more mod listing
Those 2 Mofos Rollin - NESBA I 777
Does anyone know where I can get a map for the TOCE exhaust slip on for the PC3? Does anyone have a custom map for it or can someone PM in the right direction to find a map for it? I'm pretty new to this so i Don't know much about the PC in general.. I have a 08 600rr bone stock but about to buy the toce slip for it
I've had my UK CBR600rr 2009 with stock air filter, Power Commander V, O2 sensor eliminator, and Akrapovic slipon custom dyno mapped. It was by A&M motorcycles in Hertfordshire who did an amazing job for £150 (ask for Shane, who spent hours and >50 runs tuning it).
Fuel: super unleaded 97 RON Shell,
Air temp (unfortunately, one of the hottest days of the year: 27 deg C)
New HP: 109 bhp, much more immediate power delivery with smoother throttle response , better for riding in traffic and for opening up!
Please PM me if you would like this PCV custom map file. Also have the dyno graph pics.