What did you do to your 600RR today?

[DAMNitzHENRY]

Finally had time to change my grip, but found out I needed a new throttle sleeve.

Bought a new throttle sleeve, OEM height kickstand to raise the bike back up, and lowers. Going to paint the bike soon

[Hsunami]

installed my Fren Tubo lines (orange) from the most recent group buy.
Installed New front and rear pads (Carbone Lorraine)
Changed Fluid- RBF 600

[dezzmang]

Bought 20 litres of Honda oil and a can of chain lube..

[Pythonidae]

Originally Posted by 49erRider

Made the poor decision to ride to work sick today. Sneezed in my helmet at least twice.

Gross

Wait till u come off, hit your guts and vomit :D a sneeze will be enjoyable after that :D


Sent from my iPhone using Motorcycle.com Free App

[Royal38]

Here's my buddy's ride during day and at night when lights shine on it. These are the custom decals I was talking about.Attachment 31163Attachment 31165


Sent from my iPhone using Motorcycle.com Free App

[CbrRoaR600]

I like the tank decal


Sent from my iPhone using Motorcycle.com Free App

[CK_32]

Uncovered geared up plans fell through and recovered her and put her to bed :(

[Royal38]

Nothing crazy yet simple and in good taste. Thanks


Sent from my iPhone using Motorcycle.com Free App

[DAMNitzHENRY]

Removed my heat shields. Waiting for some stuff to get delivered to do some more work on it. Got bit by the mod bug recently lol

Sent from my SGH-T989 using Motorcycle.com Free App

[Minx]

Miss her.

Been on the road for work the past two weeks and haven't been able to make any progress on the "to-do" list.

Sent from my DROID RAZR using Motorcycle.com App

[pvn23]

Installed my woodcraft frame sliders... But the precut holes weren't big enough so I had to cut it a bit more. Now that I've installed them, they're still not big enough because the left side fairing that I just bought off a guy on Craigslist probably made didn't center the hole for the frame sliders...

So now I have to make the circle a little wider and so it won't be a circle anymore :(


Sent from my iPhone using Motorcycle.com Free App

[bshantz]

Set up my new dining room table. Very feng shui.

[sk33m101]

Got to let her watch tv haha

Sent from my SCH-I535 using Motorcycle.com Free App

[Redeemer]

hahahhaha :D

[OveRReV]

Rode it hard at the track today & set a new personal best lap time, slashed 1.3s off previous best. Going to ride it again tomorrow.

[artig]

Got a gear position indicator installed, and annual service done. Rode 90km in rain to the dealer, waited around while the work was done, and rode home again. Fortunately in dry weather.

[Eurodriver]

I rode it!


Enjoy winter, Northerners.

[Jonathanmaples]

Every day almost every night


Sent from my iPhone using Motorcycle.com Free App

[nuclear0240]

Just put on my Puig race shield and replaced some fairing's from a wreck I had.

[dezzmang]

Changed the oil then tried to fit my full exhaust system but failed miserably

Now through bikes in pieces and I'm out of ideas and patience

Sent from my GT-I9300 using Motorcycle.com Free App

[Twindaddy]

New grips, new rear tire, and installed alarm and speedohealer.

Sent from my DROID BIONIC using Motorcycle.com Free App

[redlinernyc]

Originally Posted by dezzmang

Changed the oil then tried to fit my full exhaust system but failed miserably

Now through bikes in pieces and I'm out of ideas and patience

Sent from my GT-I9300 using Motorcycle.com Free App

what issues are you having? Not lining up properly?

[shadow11]

To cold here in jersey so just put in the quick disconnect for the tender charger. Weather and time isn't looking to promising


Sent from my iPhone using Motorcycle.com App

[dezzmang]

Originally Posted by redlinernyc

what issues are you having? Not lining up properly?

The yoshimura manifolds don't seem to fit like the stock ones did, they slid straight out with ease oncertain unbolted but the yoshimura ones seem to big...

Sent from my GT-I9300 using Motorcycle.com Free App

[dezzmang]

FINALLY got the exhaust on, looks and sounds awesome! Bike is still in pieces but I also changed the oil/filter and flushed the cooling system.

Now just waiting on signal connectors to arrive so I can install the new indicators and put it all back together for a ride

[saxnbass]

Installed new rear brake pads (fronts being done tomorrow or Tuesday).




Then took her out for a ride to find a nail in the rear tyre when I got home and a PSI of 8!






Odd thing is that the bike didn't handle like the pressure was low at all.

[Nico]

Originally Posted by saxnbass

Installed new rear brake pads (fronts being done tomorrow or Tuesday).




Then took her out for a ride to find a nail in the rear tyre when I got home and a PSI of 8!






Odd thing is that the bike didn't handle like the pressure was low at all.

That sucks...

Time for a new one there mate.

[saxnbass]

Yup. Thinking of having a Dunlop Q2 put on tomorrow to replace it.

[Inkslingerxx]

Installed limited edition yellow d3 grips and barends and even received free extra barends.



Installed dtiven socks for +4 hp



I have a ton of other stuff to install waiting on my new fairings to do oil air filter plugs and chain and sprocks.



Gloss tank covers

[saxnbass]

So I'm thinking of taking the tank cover off and putting some steel strips underneath so I can use a magnetic tank bag; anybody done this?