hey guys i need help first i have an 03 600rr i was out riding the other day came to a couple of lights then as i took off from one kinda hard bike stalled out. i pulled in a lot and tried to start with no luck i couldn't hear the pump prime anyhow i got it hme and hear we go.
i have on the stand i have a good battery with 12.86 volts i raised the tank and it looks like some messed with the wire in the harness one green wire witch i belive is ground was all burnt up so i cut the wire and put it back togethere with butt connectors and still no prime i have tried juming the bank angle sensor nothing haven't opened the run switch yet all fuses are good checked with volt meter and test light i also jump the pump to 12 volts and i works so pumps good. I have read on several forums about the yellow trouble shoot box in the harness that the last thing i will try tomorrow kick stand is working as should lights cluster cranks just no fuel any thought ideas would be great.
oh it also has a new ign switch from that last owner installed sorry if i confused any one with rambling lol
i have on the stand i have a good battery with 12.86 volts i raised the tank and it looks like some messed with the wire in the harness one green wire witch i belive is ground was all burnt up so i cut the wire and put it back togethere with butt connectors and still no prime i have tried juming the bank angle sensor nothing haven't opened the run switch yet all fuses are good checked with volt meter and test light i also jump the pump to 12 volts and i works so pumps good. I have read on several forums about the yellow trouble shoot box in the harness that the last thing i will try tomorrow kick stand is working as should lights cluster cranks just no fuel any thought ideas would be great.
oh it also has a new ign switch from that last owner installed sorry if i confused any one with rambling lol