Kmh to Mph?

Hyper

85 posts · Joined 2009

• Add to quote
Only show this user

#2 · Jul 14, 2009

what happened to your button?

 

E

EcosseRR Discussion starter

12 posts · Joined 2008

• Add to quote
Only show this user

#3 · Jul 14, 2009

Nothing has happened to the button, but having read the manual and from my understanding there is 2 versions of the gauge/speedo, My bike is an 03, and the button the manual tells you to press has no effect, that's why i was wondering if there is any other way around this, OR should all gauges/speedo be able to switch between Kmh/Mph?

 

xxumattuxx

7,534 posts · Joined 2006

• Add to quote
Only show this user

#4 · Jul 14, 2009 (Edited)

all speedos are capable of displaying either mph or kmh... you arent doing something right. Is the bike ignition on/off is the bike running the more information the more we can help.

set the tripmeter in A mode and push/hold the reset button.

so it has to say A between the trip and miles and under the speed, then hit reset.

 

shuwa29

1,085 posts · Joined 2004

• Add to quote
Only show this user

#5 · Jul 14, 2009

it could also be that his little piece that goes under the rubber button came loose. happened on my 03 a few times. if that's the case, then just pull the button off, use a then piece of plastic, switch it to mph, then reinsert the button. there's a write up on a fix for this. i think it's in the DIY section.

later

 

v-tec crx

7,516 posts · Joined 2008

• Add to quote
Only show this user

#7 · Jul 14, 2009

Here is how:

select trip meter A > instead of holding down the reset button, simply press it,,, that should change between units

 

E

EcosseRR Discussion starter

12 posts · Joined 2008

• Add to quote
Only show this user

#8 · Jul 19, 2009

Hi Guys,

Thanks for your replies, As Shuwa suggested the white plastic bit beneath the rubber button had come off, so tried pushing the button with a bit of plastic but it did not work, managed to replace the white plastic bit so the rubber reset button works fine now but i still cannot change it from Kmh to Mph, My bike is an Australian RR, but some time down the line i may be returning to the UK (and want to take it with me)thats why i want to be able to change it to Mph, in the owners handbook and hopefully i am understanding it correctly it says " Speed and Mileage unit change (E type only)" E type being a UK bike, My OZ bike is a " U "type so i don't think i can change the reading over, so does anyone know of any other way around this, as said before surely all units should be able to switch between readings, once again thanks for any help>