Changing the Digital Clock (Time)

mpicanco01 · Dec 4, 2009

OKayyyy.... I just realized for some reason my clock on my 2005 CBR600RR is wrong for some reason its 3 hours behind... I have tried everything possible. I can't out how to change it back lol.... I am very mechanically inclined but for some reason I cant figure this out... I can change the MPH to Kilometers and I can reset the Odometer, but can't change the clock. :banghead:

Can some one please help me!!!

Thank you in advance!!!

cbrRedRag · Dec 4, 2009

press n hold the left (adj) button and the right (reset) button for more than 2 seconds. the clock will be set in the adjust mode with the hour display flashing

Kattkomendo8 · Oct 25, 2020

Thank you, so much. That worked for my Honda 😁.

cbrRedRag · Dec 4, 2009

to set the hour, push and release the reset button (right) until desired hour is displayed

*quick setting- push and hold the reset button until the desired hour appears

cbrRedRag · Dec 4, 2009

push the adj (left) button. the minute display will start flashing

cbrRedRag · Dec 4, 2009

to set the minute, push and release the reset(rght) button until desired minute is displayed. the minute will return to 00 when 60 is reached without affecting the hour display

quick setting- push and hold the reset button until desired minute appears

cbrRedRag · Dec 4, 2009

to end adjustments, push the adj button or turn the ignition switch off. the display will stop flashing automatically and the adjustment will be cancelled if the button is not pressed for about 30 seconds

mpicanco01 · Dec 6, 2009

thanks a lot man greatly appreciated CBRRed. I tried all these combos before asking wasn't working Ill give it another try now thank you again!

Motaskate · Jan 9, 2010

problem solved....

radman5384 · Jun 4, 2012

did it work? my 05 is doing the same thing. followed the instructions to the letter and nothing......... It will not go into adjust mode.

MrRager · Jun 4, 2012

So you're pressing both buttons at the same time and then holding it for at least 2-3 seconds?When you adjust the time,press the right button adjusting the hour,then the left to switch over to minutes.Press the right button until you get to the desired time and press the left button to finish the changes.

Rickpatbrown · Jun 4, 2012

I don't think you can adjust when the engine is running.

Turn key on, but don't start bike. Hold both buttons until display flashes.

I have to set my clock all the time because my battery is on its last leg.

Sent from my Motorcycle iPhone app

hikeetech · Apr 8, 2014

I tried and tried. Nothing. Maybe the buttons are not working?

RRide600 · Apr 27, 2021

Did u ever figure anything out? Mine will not go into adjust mode either

AF4iK · Apr 8, 2014

Could be. If you're able to cycle through your tripometers and reset them then your buttons are working fine.

SloKnt · May 3, 2021

These have to be the dodgiest clock out there, always running late, forever adjusting, it’s like they were made in a former Soviet tractor factory.
My mechanical auto watches hold time more accurately than this POS.

Changing the Digital Clock (Time)

Top Contributors this Month

Recommended Communities