RR / Other Brands Bike BuildThis forum will be dedicated to RR build threads you are also entitled to post threads for other bike brands here are .net we love them all
My Orange RR Rockin so Far **Red Racing CF Frame Guard. & Samco hose kit pic p 23**
ok so i got my bike last april from cycle word in cherry hill nj. This was like the second day i had it.
First thing i did was get rid the signals and most of the mud flap. I got the idea from a member on here. NappyPriest i do believe. So its lockhart flush mounts and rear integrated light.
Next i purchased a KR Tuned titanium slip and the OEM Honda seat cowl
Most recently i have takin off the stupid mud flap do to Tripage building a tail light for us and had him powder coat my subframe-rearsets-pass pegs- exhaust can- mid pipe anddddd my gas cap.Picture from day i received everything back. I think that everything turned out great and glad i decided to get this done. Thanks T
At the same time i was getting everything PC'd i received this in the mail
bike already torn down so i got to work
Had a pretty hard time figuring out these do to this being my first sport bike. But from support on here and BrowningBucks how to thread I got threw it.
no more stock headers
after about an hour or so i finally got them together and started to look like something
Then after i finally get it all on i looked and seen this.
looks like the pipe is bending forward it scarred me but it all fit together fine. So heres the picture from today when i was done. i will post more when i get some time.
and heres a sound clip video.
i probably wont be able to do much more until after christmas cause i already spent toward 800$ on parts this month. i do believe the girlfriend is going to get me the pc3 or something for christmas. next up will be spiegler brake lines, asv levers, rim tape and a puig windscreen. any suggestions let me know
Yea I mentioned that earlier in the thread. That will be another mod and will probably get a bmc street filter. Also forgot to mention that soon the silver mids will be flat black and the lowers painted to match the pearl orange.
Also forgot to mention that soon the silver mids will be flat black and the lowers painted to match the pearl orange.
...that sounds familiar just kidding man, the bike looks great and your gonna love that new paint job! and the bike looks real clean so far, great job man!
__________________ 08 600RR - PEARL ORANGE
Custom Paint Scheme-Akrapovic S/O-KR Tuned Sliders
Rim Stipes-Puig Windscreen-Gorilla Alarm-Bikemaster Signals
LP Swingarm sliders-Xenons-Pro Grips-Oznium LED's
Graffiti Heat Shields-Seat Cowl-Lamin-X Covers
Pro-Bolt Black kit-Corbin Seat-DIY Frame Plugs
Black Driven 520 Sprockets-Black EK chain TRIPAGE STUFF
Knight Rider 3rd Eye-LED Ped Brake Lights-Adj. LED Tag Bracket
IT PRO-Krazy Eye's-All my powercoating
just got back from a local custom paint shop for bikes and its goin to cost 300 for the mids and lowers to be painted so i put the deposit down for T's new tail light haha
Very nice build. Very clean. You should get some hi-temp black paint and paint the header pipe though. I really dig the look of the black down pipe on the exhaust. You just need to finish it now.
your bike looks great.. dont pay them 300 bucks to paint ur mids.. thats BS way over priced.. do it yourself, or swap someone.. or find a cheaper place...T's light would look good on there but its so expensive is only bad thing about it.. i think im gunna send my parts over to T to get powdercoated because yours look really good
__________________
09 black 250r : SOLD :(
2008 red 600rr
I'm getting the mids and lowers painted for 300 I don't think that's to bad and plus I don't think anyone will want my mids because of the nics from rocks. And T I didn't know that's what its called my stupidity. So do you do the header. I'm guessing you will only need the piece thatt connects to the mid pipe not the whole pipe. Didn't see this on your sight or the shock linkage
We can do those 2 parts no problem.
Where you 02 plug is installed is where you did have a wire from your bike connecting to the exhaust. By installing this plug with resistors you are fooling the ECM, bike thinks everything is fine.
Have dealt with this on my dodge truck. Have 6 of these that I had to delete to get my exhaust that I wanted..
ordered a couple more things last night from cyclesector got a puig smoked windscreen a bmc filter and some techspec grip pads. will post pictures when i get them. will have the pc3 on when i get these wanted to wait till i got the filter so i dont have to keep tearing the bike apart.
ordered a couple more things last night from cyclesector got a puig smoked windscreen a bmc filter and some techspec grip pads. will post pictures when i get them. will have the pc3 on when i get these wanted to wait till i got the filter so i dont have to keep tearing the bike apart.
It's looking good! Keep up the progress. Us orange guys need to stick together Good thinking about doing it all at once.. while i was in there I did PC3, air filter, and pair delete. Have you been running full exhaust without the PC3? Was there a noticable power increase? I'll be putting on my full race akrapovic tonight. Stop by my build thread if you haven't already.
I havnt ridin the bike due to the weather being retarded. But I've been following your thread I posted on it earlier tonight about the akra said I wish I had the money to get that when I got the slip on.
My Orange RR Rockin so Far **Red Racing CF Frame Guard. & Samco hose kit pic p 23**
just kidding man, the bike looks great and your gonna love that new paint job! and the bike looks real clean so far, great job man!
Good thinking about doing it all at once.. while i was in there I did PC3, air filter, and pair delete. Have you been running full exhaust without the PC3? Was there a noticable power increase? I'll be putting on my full race akrapovic tonight. Stop by my build thread if you haven't already.
