after two month and a half since when i stored my bike for the winter, i started it today afternoon to let circulating the fluids inside the engine.
The bike started at the first try but seems to be some difficults to have a clean idle, i saw some white smoke coming out from the exaust but after 5 min it stopped(probably was just a little of condensation) but the bike also after 10mins still have some problem to mantain a fixed rpm value on idle.
is this normal?
I've also discovered that when i increase the rpm the water temp drop down(?!) is the water pump controlled as well by the throttle?
just to share it, i've done some test and yes, the water pump(at least in my bike) is controlled by the throttle. As soon as you start to increase the engine rpm the pump rpm increase aswell. Maybe this could be usefull to someone.
white smoke was condesation like you said...the water temp i saw the same thing when flushing my system...i think it just has to do with the bike at a stand still and when the valve starts letting the coolant through the engine it has a big impact because the engine was pretty warm and the coolant is still cold. as for the idle my bike does the exact same thing
Could just be as simple as the idle adjuster on the left side of the bike. I noticed when it gets colder here (30's) I need to adjust my idle to a higher rpm. In between 1250-1750 rooms at idle position. It made for a much more consistent idle. Don't know if that's exactly what you're talking about but that's all I had to do.
Just watched the video and I'm pretty sure this will fix it. I noticed the rpms were kinda bouncy at idle. Just turn your idle adjuster a little bit higher and see what happens.
you should only mess with you idle adjuster when the engine is at operating temp. When you first start a cold engine, it always idles higher.... bike, car, pickup, whatever type of vehicle, it always idles higher at start up
2006 Honda CBR600RR Black Tribal Edition
2W1R - IceTitan