Just wanted to post this since I am getting alot of request for this bracket I made from a stock part. Here is the link to Tucker Rocky's catalog page 179 it is at the bottom of the page on the on the right, part # 20-0208 $3.95. You should be able to get any dealer in the US to order this for you. http://www.powersportrider.com/cgi-bin/zcatjpg
Here are the pictures of what it looks like after drilling and painting.
Here is the Template to drill from Be sure to measure everything twice, drill once :)
Here is the under side pic of it mounted to the Brake light assy.
And here is the final view of it all together. If you have questions do not hesitate to ask.
Todd
The Following User Says Thank You to TAPnTX For This Useful Post:
did you find an online dealer? or did you just go to a local dealer and tell them the company/part# ???
Tucker Rocky is the Distributor for alot of items. All dealers in the US are probably setup with them. So just ask your local dealer to order the part in the beginning of this thread. Will cost you a whopping $4 and that is full retail.
I love this look. I went down to the dealership to order the bracket and lights, but they had all the parts in stock. I looked at the bike and this may sound pretty stupid, but I gotta cut the existing license plate holder away, right?
I love this look. I went down to the dealership to order the bracket and lights, but they had all the parts in stock. I looked at the bike and this may sound pretty stupid, but I gotta cut the existing license plate holder away, right?
tapntx I couldn't find anywhere whether you said if you bent the plate to that angle, or if it came that way. Online, it doesn't look like they come pre-bent at all? Or am I not looking at it right??
__________________
07' Black 600RR - Additions thus far: Carbon Fiber Tank Guard, Seat Cowl
04' Blue Buell Firebolt XB9R - gone..but forever my first love :(
Yes I saw that, but go look at the total for one, it is like $12 shipped. And your dealer can order it for you since they order from Tucker Rocky anyway. Half of the stuff in a local motorcycle dealership comes from them.
tapntx I couldn't find anywhere whether you said if you bent the plate to that angle, or if it came that way. Online, it doesn't look like they come pre-bent at all? Or am I not looking at it right??
No you have to bend it yourself, very easy it is thin aluminum.
I love this look. I went down to the dealership to order the bracket and lights, but they had all the parts in stock. I looked at the bike and this may sound pretty stupid, but I gotta cut the existing license plate holder away, right?
Yes, but it is very easy. Look closely at the pics, and you can see you just cut it right under the Signal mounts.
Yes I saw that, but go look at the total for one, it is like $12 shipped. And your dealer can order it for you since they order from Tucker Rocky anyway. Half of the stuff in a local motorcycle dealership comes from them.
Todd
As well as the "product may differ from picture" caption below the pic.
I had a bad experience with 58cycle due to the same type of "caption".
Sure you could, they just bolt on where the existing ones were. I had used this type before on MY 06 CBR 1000RR and liked how bright they were and relatively small.
I like those indicators, are they LED? Where could I find them?
Yes they are LED, and I got those from Cyclegear. They are also sold under the Bikemaster name and the Shock name, these were Motrax, and exclusive for Cyclegear in the US.
