Honda CBR 600RR Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-8 of 8 Results
  1. Oil and Lube
    I ride a 2013 cbr600rr with 32,000 miles n I’m leaking oil some where on my kickstand side near my coolant drain plug, would Anyone happen to know where this oil leak is coming from I found other people having the same issue but don’t explain what they did to fix it. I have cleaned it let it run...
  2. Oil and Lube
    I just bought a used 2013 CBR 600RR and after putting on a thousand miles or so, I decided to do an oil change before I put it away for the winter (previous owner had ridden it prior to the sale, so oil change wasn't immediately necessary). Previous owner had given me a left over quart of Pro...
  3. Maintenance
    I’ve been having issues with my coolant, no overheating just the reservoir bottle filling up and not getting drawn back into the bike. Anyways here are the pictures, oil had 2.5k miles so I’m not sure if it’s just old or blown head gasket note: I also did a test with a combustion leak detector...
  4. Oil and Lube
    Hi guys, I’m looking to do my first oil change on my 04 cbr. I grabbed a bottle of 10w30 Honda oil at the dealership, but when I got home an I double checked the service manual I saw that I calls for 10w40. Is there actually a big difference between these weights? Should I go back and swap it out?
  5. General Discussion
    Hi can someone advise if it's OK to use Motul 5000 10W40 High Tech, on my CBR600 RR 2013. Many thanks Iain
    oil
  6. Hi

    New Members
    Hey guys I'm Iain Young from Fort William in Scotland. Had my CBR 600 RR 2013 for five months it's awesome. Hope to be able to get help on here from you more experienced bikers and CBR owners, and assist of I can. I have an oil filter from my old cbr it's new a KN filter KN 303 looking to...
  7. Troubleshooting
    Recently did an oil change on my 2009 600RR and after warming it up I took the plug off and oil shot out of the pan like it was pressurized. Prior to doing the oil change I did a PAIR block using a marble in the hose that runs up to the right side of the air box. I’m thinking maybe I could have...
  8. 07-13 RR Modifications
    Recently did an oil change on my bike and after warming it up I took the plug off and oil shot out of the pan like it was pressurized. Prior to doing the oil change I did a PAIR block using a marble in the hose that runs up to the right side of the air box. I’m thinking maybe I could have...
1-8 of 8 Results
Top