Honda CBR 600RR Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
13 Posts
Discussion Starter #1
Ok I'm pretty new to this and my 06 cbr 600rr won't rev passed 5500 rpms. It idles fine but when I go to rev it up, as soon as it hits 6k it shoots back down. If I try to hold the throttle open it will go to 6k and keep bouncing back from idle to 6k. Once it hits 6k the fI light comes on but isn't on before I rev it. The bike also has a pc3.
Thanks
 

·
Registered
Joined
·
1,496 Posts
I know that there's a second set of injectors that come on around 5,500 RPM, but I can't imagine that they're needed to rev past that.

I know I wasn't much help, but good luck.
 

·
Registered
Joined
·
13 Posts
Discussion Starter #4
Every now and then it will get one rev that will go all the way but other than that it'll stop and the fI light will come on. But if you just turn the key it doesn't blink at all. It was installed by a local shop, which is where I bought the bike. It's been doing it since I got it and I no the pc is not mapped yet.
 

·
Registered
Joined
·
13 Posts
Discussion Starter #5
Here is a video of the mil blinks. not sure how to read it

Heres a video of the mil blinks. Not sure how to read it since it never stops.



Thanks
 
1 - 6 of 6 Posts
Top