Honda CBR 600RR Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
134 Posts
Discussion Starter #1
Im working on a 2004 600rr that will not start. I received the bike non running and I replaced the spark plugs and the pick up. I have also bypassed the tip over switch. The bike has excellent spark and I know its getting fuel to the injectors. However, I dont think fuel is getting past the injectors. Plugs do not appear to be wet. With the key on their is 12.8v of power to the injectors. I also put 6v of power to the injectors and they click open.

All i have been able to get out of the bike is some smoke and one puff of flames out the exhaust. Very open to suggestions! Thanks
 

·
Registered
Joined
·
134 Posts
Discussion Starter #5
I have found the culprit... Blown head gasket.. Poured some Marvel down the cylinders(Assuming stuck rings) and it came right back out of the front of the head. Off with its head!
 
1 - 6 of 6 Posts
Top