[raneRR]

I just recently installed some Shogun bar sliders and when I got them all tightened down, I can spin them. Are they suppose to spin? When I had my R6 they would not move at all so Im just curios if they are defective or if thats the Honda design? It does make sence for them to spin if you go down. Thanks for any help.

 

[Marshall]

My stock bar ends spin. I wouldn't worry. Just make sure you use some locktite. But get the blue stuff so you can take them off later if needed.

 

[daleCarlsbad]

You might drop these folks an e-mail and ask them....

http://www.shogunmotorsports.com/2003Road/indexRR.shtml

 

[raneRR]

Cool thanks guys. I will send them an e-mail and see if its normal or not. I think they are suppose to, cause I looked at the stock bar end from my R6 that I still have, and its one big screw on the end. So it attaches totally different then the ones on my honda. I also thought about using loctite on these ones too, but when I put some on my R6 I could not get the things off at all, and it was the blue stuff thats removable. I also used some on my swingarm sliders I had on it, and I ended up stripping out the slider screw, and I could not get the slider off. So I did not use any loctite on my RR.

 

[Guest]

one side spins one side does not.... I have the Intiutive bar end sliders.... I really need to get some locktight!