Honda CBR 600RR Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
2,959 Posts
Discussion Starter #1 (Edited)
Tried the search bar with no luck so hear is my issue

I did a coolant flush today, drained coolant, washed out resivoir, poured distilled water blipped the bike a bit till all fluid coming out of the drain plug was clear. Poured this stuff



into the radiator and the resivoir ran the bike a bit and put it all back together. Took the bike for a quick ride and the temp shot up to 240 in town. I stopped and let the bike cool then went out again. It stayed cool at freeway speeds but as soon as I got back in town the temp shot up again. It wasn't doing this before the flush.... Any thoughts????
 

·
Registered
Joined
·
2,959 Posts
Discussion Starter #3
the bike has 16k miles not sure if that what you were asking..? I rode the bike abut 10 miles total after the flush
 

·
Registered
Joined
·
2,959 Posts
Discussion Starter #6
So now that I feel stupid.... Air in the system, got it out in like 15 minutes. Everything is back to normal. Thanks for your help guys I freaked out and didn't think of the basics first. Just went straight to panic mode haha...

Thanks again!
 
1 - 6 of 6 Posts
Top