Honda CBR 600RR Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
hi everyone

so i had an accident on my 2008 rr i have been trying to get her back up and running at first the fuel pump wasnt priming but i purchased a new hiss antenna and now its priming.......i thought Great here we go until i pressed the start button it cranks over but just doesnt want to start, im getiing a code 3 long blinks and 5 short so would be 35 which i know is to to with the EGCV servo motor but from what i have read online the bike should still start??? can anyone confirm this please if not what would be my next plan of action?

from what i know if it was one of the sensors such as crank/cam/bas ect the fuel pump wouldn't prime so i am ruling these out

any help would be much appreciated

thanks matt
 

·
Registered
Joined
·
5,094 Posts
IIRC, 3-5 means the servo can't cycle properly(or another fault in the ECGV system).

check for bends/crimps in the EGCV drive cabling, and loose connections between the units that control EGCV.

After that IDK, keep posting?

HTH
 
1 - 2 of 2 Posts
Top