Honda CBR 600RR Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
83 Posts
Discussion Starter #1
I have gregg's up front and Clear Alternatives in the back with resistors. Yesterday I pulled off the tail and fenders to work on the bike. After putting it all back together, the blinkers now blink fast and both sides blink at the same time like hazard lights. It doesn't matter whether I turn on the left or the right, both sides blink. Any ideas?
 

·
Registered
Joined
·
569 Posts
if it was working before and you didn't do anything related to the signals.. then you proabably have a short with the resistors to chassis.. only thing i can think of. .again.. assuming the work you did to the bike wasn't related to the blinkers..
 

·
Registered
Joined
·
71 Posts
It's a sign from god. jk. But, yeah, resistors seem to be problematic to many. They do heat up, so I would check for something melting....or melted.
 

·
Registered
Joined
·
83 Posts
Discussion Starter #5
I figured the problem was probably with the resistors. I'm going to pull the tail off and rewire everything with new connectors. The connectors that come with the CA's are pretty junky. Thanks for the help guys.
 
1 - 5 of 5 Posts
Top