Honda CBR 600RR Forum banner

1 - 11 of 11 Posts

·
Registered
Joined
·
43 Posts
Discussion Starter #1
This just started happening recently... I hit my front brakes as usual "not hard or anything.." and my brake light stayed on... Well when I push it out the light turns off... I was looking over the assembly of it, and it looks like the spring that hits the button is sticking or not retracting fully.. Any suggestions on fixing this?
 

·
Registered
Joined
·
1,378 Posts
are you saying you push the lever out to turn it off? Cuz it should move all the way out by its self
 

·
Registered
Joined
·
2,628 Posts
is your brake still engaged till you push it out or just the light?
 

·
Premium Member
Joined
·
13,137 Posts
sounds like the return spring in the master cylinder isn't working properly, probably easier to get a new master than try rebuild the old one.
 
D

·
Guest
Joined
·
0 Posts
Could also be that the lever is binding. Is the lever not overtightened and being pinched by the master cylinder?
 

·
Premium Member
Joined
·
13,137 Posts
A bit of graphite should fix that right up, and loosen the bolt a touch.

Unless Demented wants to give you his new one... ;)
 

·
Registered
Joined
·
43 Posts
Discussion Starter #11
Yep, I hit it with some graphite and loosened the bolt up a bit and its just fine now :p, thanks guys.
 
1 - 11 of 11 Posts
Top