Honda CBR 600RR Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
23 Posts
Discussion Starter #1
hi all i have a rr 09 ihave recently serviced the bike at the dealer where all seems fine until i was riding about i hit the gas in 3rd gear and it felt like i was making loads of noise and not going any where i then took it to the motorway to really give it some and again got to about 115mph and it felt like it was starting to slip again it feels fine pulling off it has only 4700 miles on the bike and have noticed some of you are getting 15k plus on a standard clutch i have just adjusted the lever just before this started by adjusting i ment i took the slack out of the cable the bike seems to go into gear nicer than before i adjusted it but i never felt it slip before can anyone help thanks
 

·
BOTM Winner 07/12
Joined
·
1,714 Posts
You need some slack in the clutch lever. The service manual calls out 10-20mm for freeplay in the lever.
 
  • Like
Reactions: rick0000

·
Premium Member
Joined
·
13,137 Posts
One would hope that the dealer put the right stuff in.... but I suppose they have made stupider mistakes before...

I would be putting the slack back into the clutch lever first.
 
1 - 4 of 4 Posts
Top