Honda CBR 600RR Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
244 Posts
Discussion Starter #1
Hey everyone.

At the weekend I installed Arrow headers on my 2010' HRC. There was already an Akrapovic slip-on fitted and I removed the servo and installed the emulator.

My problem is when I start to decelerate the bike starts to jerk, like its engine braking/then accelerating. It starts at 7000rpm all the way down to about 3000rpm. Maybe lower. Can anyone help with this? It's only started since installing the headers or servo emulator.


Sent from Motorcycle.com Free App
 

·
Registered
Joined
·
244 Posts
Discussion Starter #3
Ive had 3 different maps in it so far. And all do the same. Must be a back pressure problem or something.
 

·
Registered
Joined
·
14 Posts
I'm experiencing something very similar. But mine doesn't "jerk". It just drops off to nothing. Like you just dropped to idle.
 

·
Registered
Joined
·
244 Posts
Discussion Starter #7
I had some time during lunch today and I took out the TST servo emulator then replaced the original servo but left the cables disconnected as there's nothing to connect them to.

Took her out for a spin and shes fixed. I must have got the only broken servo which would be my luck.

Thanks to everyone who gave their suggestions for help.
 
1 - 7 of 7 Posts
Top