Honda CBR 600RR Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
13 Posts
Discussion Starter #1
I hav 07 600rr just cleaned my tank fuel pump spark plug and the head of 4 cylinders. .and after clean up i just only kept 3 ltr of fuel on it..and started the bike .bike started and there's F1 lights on....is it due to?low fuel in my tank after the whole cleanup
 

·
Registered
Joined
·
269 Posts


Check code and tell us what code you get.
Eg.
Two Long Flash = 2
Three Short Flash = 3
= Code 23
 

·
Registered
Joined
·
13 Posts
Discussion Starter #3
No code it only remains constant after my engiene is started when it engiene is off it doesn't blink
 

·
Registered
Joined
·
269 Posts
Try to clear codes and recheck for codes
Follow under heading Clearing DTC
 

·
BOTM winner 03/15
Joined
·
2,308 Posts
It doesnot blink i tried a lot remains constant after i start the engiene

I don't think you need to short the plug on 07+ (could be wrong but that's what I read). Make sure bike is in neutral and kickstand is down. FI light won't flash a code otherwise.

Have a good read through this thread. It's an old sticky but there are more up to date posts relevant to your year/model.

http://www.600rr.net/vb/showthread.php?t=85319

P.S you'll probably get better answers if you post in the troubleshooting section of the forum.
 
1 - 6 of 6 Posts
Top