Honda CBR 600RR Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
241 Posts
Discussion Starter #1
I just installed the graves smog block off plates and now my bike starts rough. I have to give it gas for it to start or it won't start at all and then idles rough until unless I hold the throttle for a couple seconds and then it'll idle normal. But when it's running the FI icon will show and the oil light blinks any idea why? I followed the instructions word for word.
 

·
Registered
Joined
·
241 Posts
Discussion Starter #4
The oil light did 2 short blinks and that was said to be the map sensor/map sensor vacuum leak. So the problem was a map sensor vacuum line that wasnt connected. Once I connected it the problem was fixed.
 

·
Registered
Joined
·
2,044 Posts
Ok, that's what I figured.

It's nice to post what was the resolution rather than just a "it's fixed" for future searchers.

Thanks!!!
 

·
Registered
Joined
·
241 Posts
Discussion Starter #6
No problem I think that's a good idea as well. I'll also include the blinking numbers and what that code means for anyone who finds them self needing that info..
 
1 - 6 of 6 Posts
Top