Honda CBR 600RR Forum banner
1 - 8 of 8 Posts

·
Registered
Joined
·
593 Posts
Discussion Starter · #1 ·
ok...ithis is the easiest cheapest way to cover the mounting bolts....just stop in at the local auto parts stores and what ya want to look/ask for is HOOD INSULATION RETAINERS...looks like a giant black platic tack.....the package had 3ea. in it for a BUCK 77....just had to trim the center peg with a razor knife and installed with RTV/SILICONE SEALER....also had to reshape the one on the lower left/shifter side...just nuked it in the microwave and forced it inside a shot glass, but anything that is about 1.75in. dia. will work and when it cooled it retained the large radius at the edge to bottom out against the frame...just a simple glue on cover but it works or me....
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top