Honda CBR 600RR Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #1
Changed my front rubber, and now I'm having a hard time rotating the tires. It feels like the calipers are squeezing the rotors.... Does anyone have this problem?

My bike is an 06 600rr.
 

·
Registered
Joined
·
249 Posts
Take off the calipers and see if the wheel rotates freely. If so re install one of the calipers and see if the wheel rotates freely. If so install the other calipers and see if the wheel still rotates freely. if it is still grabby, loosen the axle pinch bolts and axle bolt. Re-tighten to spec. If that clears it up put on a helmet and take it for a test drive
 

·
Registered
Joined
·
4 Posts
Discussion Starter #4
thanks for the thread guys... i'll re-do all of it and make sure it's done the by these procedures... on that note, i've been riding the bike for a week now with the issues I'm having, and I haven't had any problems yet.. but I'm not gonna wait till then... :) again thanks for the great info!!!
 
1 - 4 of 4 Posts
Top