Honda CBR 600RR Forum banner
1 - 13 of 13 Posts

· Registered
Joined
·
137 Posts
Discussion Starter · #1 ·
Hello!

Does anyone have a pin out of the 20 pin connector for the gauge cluster? Or possibly could take a photo from top and bottom so i could see which wire goes where?

I have the service manual however it doesn't show wire locations in the connector (2006 CBR600rr)

Thanks!

the picture attached shows the wires going to the cluster but no locations :(
 

Attachments

· Registered
Joined
·
137 Posts
Discussion Starter · #5 ·
That's right! Sent you a pm but to clarify I'm interested in the connector, particularly what wire goes in what slot. Trying to create a pin out of the 03-06 cluster harness.

I have a 2007 cluster harness but some of the wires are different colors. And I can't be sure the pin location is the same. It's easy enough to pull the pins. The connector is the same, but that seems to be about it

Thanks!
 

· Registered
Joined
·
137 Posts
Discussion Starter · #12 ·
So I plugged in the power, ground, SP wire (whatever that is), resistor sensor and the tachometer wire just to check. Nothing happens :/

it appears like I have everything in place :( I have no idea what's wrong
 
1 - 13 of 13 Posts
Top