Honda CBR 600RR Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
42 Posts
Discussion Starter #1
Sent my gauges away to get some led's changed out and got it back with my needel pointing at 6500 rpm. I do not want to put my bike back together and turn on my guages to reveal my needel messing up after i put everything back together. Is this a big deal or will the needel Re-Zero it'self. Or do i need to manually do that myself?
 

·
Registered
Joined
·
91 Posts
im pretty sure you have nothing to worry about it i never had this problem on a bike but had in in cars and it jus goes back to normal no need to panic
 

·
Registered
Joined
·
1,063 Posts
Did you try powering it up to see if the needle just shifted during shipping?
 

·
Registered
Joined
·
376 Posts
Dude, you don't have to bolt the whole bike back together, just plug it into the harness and turn the key. I did this like 20 times when LED modding the dash myself.
 

·
Registered
Joined
·
1,780 Posts
The guy who assemblied the guage back together should've installed the needle at the zero point....Hopfully when you power it up it will reset itself, but if it doesn't your going to have to pull the cover and reset the needle....
 
1 - 8 of 8 Posts
Top