Honda CBR 600RR Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter #1
On Friday, I'm going to a salvage yard to look for a donor engine for our project. I want to hand turn it to make sure the internal mechanicals are sound before I purchase it. I know it may vary according to the year but what is the basic approach to hand turning the engine?

Do I rotate it at the output shaft or magneto drive? somewhere else?

Kind regards.
 

·
Registered
Joined
·
617 Posts
I would assume its the same for all years
 

·
BOTY 2014 Winner
Joined
·
4,825 Posts
I would assume its the same for all years

how insightful



there is an inspection cover on the right side of the bike. you need a 17mm socket to remove it.

behind it you'll get access to the crank. you can turn it clockwise using a 14mm socket. you'll also need an extension as it is recessed behind the cover.
 
1 - 3 of 3 Posts
Top