Honda CBR 600RR Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
881 Posts
Discussion Starter #1
well headlights are not working again. i have soldered the wire in the kill/starter switch twice now. first time the guy at the motorcycle shop did it and it didnt hold for a day. then one of the arnament guys i work with who did 23 yrs in the airforce who is by far the best at soldering did it for me. i mean he took his time and took like and hour to do it which it lasted maybe 2 weeks. and when i started it to head home after work there off. so ive come to realize its not working. so my question is do i have to buy the whole kill switch or can i replace the lower half only?
 

·
Premium Member
Joined
·
13,137 Posts
Whole switch, but it shouldn't be necessary... you should be using a eutectic solder and a 40W iorn, once you have those de-solder and clean the joint thoroughly and resolder. Should hold up fine.
 

·
Registered
Joined
·
254 Posts
What year do you have? I've got my old killswitch assembly off an 05, if you're interested I'd sell it on the cheap.
 
1 - 4 of 4 Posts
Top