Honda CBR 600RR Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
Is it possible to quickly remove the front signals for a track day. I know if my bike goes down they are going to destroy my fairing even though I have sliders.

Can you pull them of and unclip the wireing, or do you need to remove fairings.

I am riding to the trackday so they would have to come off and on quickly.

Also what about the rear bracket. It looks like you have to remove the tail just to get to the screws, and I dont know about the wireing.

Any info on this appreciated. Thanks
 

·
Registered
Joined
·
4,407 Posts
the wiring quickly unplugs. although to actually remove the front signals you might have to pull the front fairing. I wonder if you could pull the ram air covers to help access them from the top and not remove the upper front?

Dont worry about the rear. the signals are the last thing to worry about back there-the rear pegs and tail itself will be damaged in a fall regardless.
 

·
Registered
Joined
·
659 Posts
To remove the front signals you have to undo the front fairing basically all the way. It's not an off and on quickly process. You could take an allen wrench and screw driver to the track with you to remove them.

It'll take you approximately 25-40 minutes to disassemble/reassemble the first time.

 
1 - 4 of 4 Posts
Top