Honda CBR 600RR Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
205 Posts
Discussion Starter #1
i took all the front fairings off to hide the ballasts for my hid's got it all back together and the right front turn signal and back turn signal will not work and the gauges and all the lights start blinking dim. but if i unplug the right front the back one will work and the turn signal light will work on the cluster also.
I checked over everything i unplugged. Whats up with it?
 

·
Premium Member
Joined
·
13,137 Posts
Chances are you damaged it somehow when you took it all off, have a good look at the indicator and see how you go.

You will more than likely need a new one.
 

·
Registered
Joined
·
205 Posts
Discussion Starter #3
That's what I was hoping that it was just the one. But on my way to work this morning none of the turn signals would work the led on the dash wouldn't light up and the gauges weren't dimming or anything so idk what's going on
 

·
Premium Member
Joined
·
13,137 Posts
Your damaged LED is loading the rest of the system down.

Check the rating of the fuse and look for an issue in the wiring around that area, you may find some corrosion causing the voltage supplied to the other lights to reduce whilst not drawing enough current to blow the fuse.
 

·
Registered
Joined
·
205 Posts
Discussion Starter #5
Where is the fuse at?
 

·
Registered
Joined
·
205 Posts
Discussion Starter #6
Anyone know where the fuse is?
 
1 - 7 of 7 Posts
Top