Honda CBR 600RR Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
348 Posts
Discussion Starter #1
ifixed the turn signal issue ( lose connection)

now my only problem is the LOW beam not turning on...
when i flip the switch to the ON position ....i hear a very faint click in the ballast..

i do remember now. when testing the bike last nite..... when i tried flipping the sswitch ON. i heard like wire crackling they i smelt like wire burning...]
then this morning i tried agian and all i hear is a small faint click on the ballast of my HID..
the fuuses are fine also...'

do u think i burnt the ballast or something???
 

·
Registered
Joined
·
239 Posts
how strong is your battery because on mine the hids dont work if the battery is kinda weak try chargein it up then try ! ! !
 

·
Registered
Joined
·
348 Posts
Discussion Starter #3
nope....not the battery..........my high beam HID works fine upon startup


it must be the ballast or something blown...if u hear a sizzle of wires then a smell
wat do u think it can be??
u think the ballast or the bulb....
and dont ballast have a lifetime warranty or some thing??
im so freakin pissed!!!!!!!!!!!
 

·
Premium Member
Joined
·
14,330 Posts
Pull the ballast and see if you can see any shorts in the wires, any visibly wrong with it? T
 

·
Administrator
Joined
·
51,153 Posts
Sizzle of wires then smell is not a good sign check the wiring connections
first hand before the headlight harness gets fried
 

·
Registered
Joined
·
247 Posts
reverse the spade connectors on the low beam.
it is reversed from the high.

I used the write up here on the board and it was a great step by step, there is even a picture of the plug on the bike that the spades go into. but for some reason it didnt work for me. I reversed the pos/neg plugs on the lowbeam side and problem fixed.
 
1 - 6 of 6 Posts
Top