Honda CBR 600RR Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
1,821 Posts
Discussion Starter #1
Need pictures on a 05 600RR either stock or someone with Woodcraft 3 piece clipons. Clearance issues with lock to lock, clutch lever & master cylinder slamming into my speedo and brake lever hitting my HRC throttle before fully applied. so i just need them to compare the angles. One from the rider's seat Point of View of the bars/lever angle and One from the front end, both with the wheel straight please. Thanks.
 

·
Registered
Joined
·
211 Posts
Are those clipons longer than the stock ons? They look like they are about an inch or two longer than the stock clipons.
 

·
Registered
Joined
·
1,821 Posts
Discussion Starter #4
yeah they are longer...the handlebar is way out but full lock to the left, the master cylinder is still banging into my speedo because the stock clipons are on a rise at the clamp while these go straight out. didnt want to redrill/cut my HRC throttle tube so i took a break and ordered a 1000rr master cyclinder. =P
 
1 - 6 of 6 Posts
Top