Honda CBR 600RR Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
35 Posts
Discussion Starter #1
Hello. Anyways im working on my first DIY oil change. I replaced the filter, drained the old oil, filled it up with 3.1 quarts of new 10w-40 and there is nothing in the oil window indicator. I stood the bike up rolled it around a bit and still nothing does anyone have any ideas? Thanks in advance sorry im a newb.
 

·
Post Whore Extraordinaire
Joined
·
19,904 Posts
looks liek your a tad low, there are too markers on the window, it should be between them when standing straight up
 

·
Registered
Joined
·
35 Posts
Discussion Starter #5
Okay thanks guys I got it. For some odd reason it took over 3.5 quarts and its right in the middle of the two lines standing straight up not on the side stand.
 

·
Registered
Joined
·
3,766 Posts
Flar767 said:
Okay thanks guys I got it. For some odd reason it took over 3.5 quarts and its right in the middle of the two lines standing straight up not on the side stand.
Hope you know that you have run/warm up the bike for 15/ till it gets to 170F.
let it sit for another 15 min and then check the oil level.
The oil will expan when the bike warms up. you might have to much in
 
1 - 6 of 6 Posts
Top