Honda CBR 600RR Forum banner

1 - 11 of 11 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter #1
i ordered race rails from them last month on the 24 it almost been 1 month and they still havent ship it out. Has anyone ever experience this problem from this company i try to complain about this problem but all they say is it will be ship out next week. Im still waitin on them to come in
 

·
Registered
Joined
·
256 Posts
I've heard that they're on back order right now. They could let you know that, if they are, but that's probably why. Good communication with customers should be a high priority.
 

·
Registered
Joined
·
6 Posts
Discussion Starter #3
yeah it sucks because they keep saying they were on vacation so they couldnt ship out the rails and i still have received it at all
 

·
Registered
Joined
·
4 Posts
I ordered mine two months ago from warpedtoys.com and they finally arrived yesterday. I have read that they don't come with directions which really sucks for me since the box busted open during transit and i think i am missing pieces. Does anyone that own them know what pieces came with it? I emailed both warpedtoys and powers and neither have responded as of yet.
 

·
Registered
Joined
·
160 Posts
2nd time im writing this, my browser decided to **** with me

Sooooo
I have an 05 600RR and ordered Race Railz in january. recieved within 2 weeks.

Came without instructions but i called them and they were more than happy to fax me a copy on the spot. The pictures were unclear but they told me if i ever had a problem putting them on, theyd personally walk me through it over the phone.

Package included

2 Race Railz (obviously)
2 Billet Aluminum Sliders
1 3/8" x 14" All-Thread Rod
2 Nuts For The All Thread
1 12mm x 4" Bolt
1 12mm x 3.5" Bolt
1 Washer
1 Billet Aluminum Spacer (For CBR929 Only)
2 Rubber spacers

It is also recomended that you use RED LOCTITE for the front motor mount bolts.

Also i heard that they used to ship out 4 rubber spacers. Each Rail has 2 Flat bars connected to it, one attatched to each end so that they rest against the frame when mounted, the rubber spacers are supposed to be used between the frame and the flat portion of the rails. but since there were only 2 i called (today actually) and they gave me the option of either cutting the 2 i have in half, or just shipping 2 more to my house.
I asked to have 2 more shipped and she said they would be here monday or tuesday.

No i have not installed them yet, im waiting on a friend to help me mark and cut the fairings first. but hes lazy and slow. everything seems pretty self explanitory and overall i have not had any real problems with Powers Stuntworx. They are a small business so i give them a little slack when it comes to minor details, but overall id say their customer service is excellent.

as for the shipping problem, i do agree a month is a long time to wait, i would just call them and politely let them know how long its been, and request priority or overnight shipping if they have not already been sent out.

im going to see if i can possibly post a step by step when i do install them.
 

·
Registered
Joined
·
4 Posts
Thanks for the reply. It appears i have all the pieces. Do you have any way of posting those instructions? Trying to figure out if i have to remove the lock nut from the motor mount to install the all thread rod. I dont have the key for it, have to run to the store if that is the case. Where are you located, might be able to meet up for install?
 

·
Registered
Joined
·
160 Posts
Im located in south jersey, actually my dad is in the process of having a peice machined at work to fit a socket wrench for the lock nut, but in any case, i spoke with motoRRhead about the install (he has Race Railz too), and he said he didnt have to worry bout the lock nut. He pointed out that the opposite side is just a regular hex nut, and if you can tap it loose, the whole thig will come out apparently. i have yet to try it, like i said im waitin on my fairings to get cut first. but if your in the area lemme know. id be more than willing to help with the install, i gotta figure it out eventually anyway. i had the instructions on an e-fax, its for the crash cage actually, but the install is the same minus the last 2 or 3 steps. ill try n post if i still have it.

 

·
Registered
Joined
·
160 Posts
(nevermind... got it ^)

it wont let me attatch or import anything above 97kb or over 620x280
how the hell do people upload those big ass pictures when theyre posting a step by step?
 

·
Registered
Joined
·
4 Posts
Im in Minnesota, so no luck there. Thanks for the instructions though, i will take pictures during the install and attempt to make a readable writeup on it in case anyone wants to see it.
 
1 - 11 of 11 Posts
Top