Honda CBR 600RR Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
311 Posts
Discussion Starter #1
Hi,

I got a 08cbr 600 with vortex rearset and pressure switch. Everything was installed when i bought the bike. I'm not sure if it was originally working or not but the tail light is not coming on when i hit the rear brake pedal. it comes on with the front brake.
anything i could try?
 

·
Premium Member
Joined
·
13,137 Posts
Check that the switch is working with a multimeter, and replace it if it isn't....

Then check the wiring to it as it may have been a dodgy job in the first place
 

·
Registered
Joined
·
311 Posts
Discussion Starter #3
wiring coming from the bike is good, at least according to the multimeter. I'm not getting anything form the switch though.
could i have a bad switch? I'm gonna take it off later on tonight. I needed to bleed the brakes anyways
 

·
Premium Member
Joined
·
13,137 Posts
Could well be the switch... if its not working the light certainly wont turn on...
 

·
Overpaid South Pacific Barista overactive ADHD c
Joined
·
27,367 Posts
nice nico , subtle call there

check that there are no blockages in the pressure switch....
 
1 - 5 of 5 Posts
Top