Honda CBR 600RR Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
today i put on a fender eliminator kit for my 07'. i had to disconnect my lights in the back. after i put the kit on i connected my lights back up and the back running lights wont work but the turn signals still work. i didnt do anything to the wires at all.
 

·
Registered
Joined
·
3,672 Posts
there is no such thing as rear runnin lights
the rear turn signals are only 2 wire lights so they function as signal only. the only light in the back that is always on is the plate light
 

·
Registered
Joined
·
3 Posts
Discussion Starter #3
well if that is the case why are my front signals a solid lite and flash when the turn signal is on. my rear turn signals use to work just like my front set
 

·
Premium Member
Joined
·
14,330 Posts
The front turn signals have running light/ turn signals, three wires. The rear signals only have two wires going to them. They are only turn signals. You can look at your front wires if you don't believe us but the bikes don't come with rear running lights for the signals. T
 
1 - 7 of 7 Posts
Top