Honda CBR 600RR Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
923 Posts
you have to remove the tail first then you find the two bolts that hold the rearsets and then you have it, the tail is going to be a little hard to take off but dont worry it doesnt broke ok. good luck, i think you are going to PC black right?
 

·
Registered
Joined
·
31 Posts
You shouldn't need to take the tail off to get the rearsets or the rear passenger pegs off. There are two large hex bolts that need to come out to seperate the pegs from the bike- Then find all the little bolts that hold the parts onto the rearset.

Should end up with a few screws and the rearsets off the bike...The master cylinder would be hanging off the bike still.
 
1 - 3 of 3 Posts
Top