REV CLUSTER BOUNCY
1 - 2 of 2 Posts
Joined
·
2,014 Posts
Have you looked at it at all?
There are screws that hold the cluster housing to the fairing stay and the fairing stay mounts to the frame. So you could have a broken housing, missing screws or a bent, bad or broken fairing stay. Repair as needed.
1 - 2 of 2 Posts
Join the discussion
Recommended Reading
-
Possible reason for bike not accelerating like it use to after riding in the rain
General DiscussionI have a 2008, and I road in a downpour last season, and the next few times I rode after that, I noticed that my bike didn't seem to have that "pull" like it use to. Idk if the rain has anything to do with it, or its all in my head, or what. I've my bike for about 5 or 6 years, only 8k miles on...- 3
- 95
-
jawsolsen333 · updated
-
ECU/modding
General DiscussionHello guys I just joined this forum I have a 2009 Honda CBR600RR (two brother's exhaust). There is this place 30 minutes away from my house that does ECU flash. I don't know too much about ECU flash, but the basics only. I was told from the performance shop that they would flash my ECU. In doing...- 2
- 146
-
BrownKnight · updated
-
Help
General DiscussionMy bike is getting fuel and spark but will not start- 1
- 57
-
Murphy.oconner · updated
-
So you want a Supersport as your 1st bike?
General DiscussionSaw this on a local forum and figured it was worth sharing. This is for the age old question that gets asked here often enough. Link to image- 471
- 118K
-
sincalirider · updated
-
New to forum - CBR600RR - Help! Dead engine - scrap or repair - UK based
General DiscussionHi all, apologies in advance for the negative 1st post but i have a 2003 RR which wouldn't start although fuel pump was ok etc just span really fast on the button but wouldn't fire. Turns out cylinders 1 and 4 had 40 psi and 2 and 3 20 psi so engine pretty well toast although was running fine...- 14
- 612
Join now to ask and comment!