Honda CBR 600RR Forum banner

1 - 20 of 193 Posts

·
Registered
Joined
·
5,488 Posts
Discussion Starter #1 (Edited)
Track Only '05 RR​


Suspension
  • Elka Triple Clicker Rear Shock
  • Marchesini Forged Magnesium Wheels – Gold
  • Scott’s Steering Stabilizer
Engine
  • Dynojet Power Commander 3
  • Full Titanium Arata Exhaust System
  • BMC Race Air Filter
  • FactoryPro Velocity Stacks
  • D.I.D. ERV3 520 Chain
  • Driven Sprockets
Brakes
  • ’06 R1 Brembo Master Cylinder
  • ’06 R1 Front Brake Calipers
  • Galfer SS Brake Lines
  • Motul Racing Brake Fluid
  • Galfer Wave Front Rotors – 330mm
  • Galfer Wave Rear Rotor
  • Vesrah RJL Front Pads
  • Vesrah JL Rear Pads
  • G-Craft Rear Master Cylinder Type 2 - Silver
Comfort
  • Gilles VCR Rearsets w/ CF Heel Guards
  • GP Shift
  • Techspec Snakeskinz
  • Renthal Medium Grips
  • Pazzo Short Clutch Lever
  • ASV Short Brake Lever
Protection
  • R&G Frame Sliders
  • R&G Bar Ends
  • R&G Fork Sliders
  • R&G Spools
  • R&G Toe Guard
  • Woodcraft Frame Sliders
  • Gilles VCR Rearsets
Looks
  • Sharkskinz Race Plastics – Painted HOK Black Pearl w/ Silver Autobot Decal
  • Powder Coated Subframe
  • Powder Coated Clutch Cover
  • Powder Coated Alternator Cover
  • SSR Race Gas Cap
  • Puig Racing Windscreen – Painted Black
  • OEM Windscreen – Painted Black
Other
  • Gilles Chain Adjusters And Lifters - GOLD
  • Woodcraft '08 Dual Temp Tire Warmers
  • Speedohealer
  • XT Lap Timer
  • Laptimers.com XT Lap Timer Holder
  • Acumen Gear indicator
Titanium Bolts
  • Front and Rear Brake Rotors
  • Front Brake Caliper Bolts
  • Front Fork Pinch Bolts
  • Swingarm Pinch Bolts
  • Clip-On Bolts
  • Triple Tree Bolts
  • Hand Control Bolts - the ones that tighten the M/C to the Clip-Ons
  • SubFrame Lower Mounting Bolt
  • Rear Brake Caliper Bolt
    Water Pump Bolts
For Street Duty
  • PIAA Lights
  • Bikelitez Brake Light Bar
Gear
  • Arai RX7 Hayes Jolly Rogers
  • Gaerne Boots
  • RS-Taichi NXL300 Gunmetal w/ Slyder on the back white background & Silver lettering
  • Joe Rocket GPX 2.0 Gloves - White
  • RS-Taichi Back Protector
Future Mods:
  • Vortex Fairing Stay
  • RC51 Start/Stop Killswitch (Ordered)
  • EuroRacing Quick Throttle (Ordered)
  • Driven Res Sock (Ordered)
  • Traxxion AK-20's Front Suspension
  • Dynojet / HM Quickshifter
  • Dynojet Ignition Module
 
C

·
Guest
Joined
·
0 Posts
Pictures! We need pictures man!
Nice list. Looks like your a die-hard ridersinc shopper! Nick is the man.. Everyone call up Nick at www.ridersinc.com and ask him for a 600rr.net discount! ;)
 

·
Registered
Joined
·
5,488 Posts
Discussion Starter #5 (Edited)
yeah, eventually i'm going to get the scotts stabilizer. i want an afam rear too but i'm nervous about all the stories i hear on here about aluminum rears and the teeth on them. i don't ride bouncing off the rev limiter or anything, i don't want the sprocket to wear incorrectly.

I'm pretty sure i spent well over $2.5k @ MRI... and that was in like a weeks span!!! :burnout:
 

·
Registered
Joined
·
1,876 Posts
Very nice looking ride.

I run Afam aluminum rear sprockets on my 954 and will when I change the sprockets on the 600. They last much better than the vortex.
 

·
Registered
Joined
·
980 Posts
so you have no mirrors now?
 

·
Registered
Joined
·
5,488 Posts
Discussion Starter #8
lol i was trying to figure out who im'd me... lol.. yeah i have no mirrors now. i didn't use them all that much anyway & i love the look!
 

·
Registered
Joined
·
91 Posts
Beautiful bike man...

Have you dyno tuned that bad boy? Any #'s for us?
 

·
Registered
Joined
·
5,488 Posts
Discussion Starter #10
not since i started using the Akra map. when i took it in i was using a leo vinici map and it was that great of a map for the pipe and then i they made the akra map and i've been running that since. there any certified dyno tuners around here that i know of so that hopefully that map is a good the next time i take it to my shop again just to get a dyno run.
 
C

·
Guest
Joined
·
0 Posts
I like the look, but damm you gotta watch your 6. Maybe some CRG bar end mirrors or something.

Your CF fender has a lot less material than mine. I have the oem style that wraps around the forks. Yours is is kinda cut-away design.. BTW, thanks for mentioning me in your thread.

:wave:
 

·
Registered
Joined
·
49 Posts
your bike is beautiful...Great job on it....
 

·
Ducati Champion Del Mondo
Joined
·
7,847 Posts
Sweet! I'm not much for CF but I am coming around on it abit. Make sure you keep that plate off that rear hugger cheif.

Jason
 

·
Registered
Joined
·
101 Posts
would you recommend the dark smoke windscreen or go with the black. I think the black is really cool but is on national backorder. Is it worth the wait?
 

·
Registered
Joined
·
5,488 Posts
Discussion Starter #15
mine was the dark smoke that i painted black... honestly, if i could do it again i would have just painted my stock screen black.
 

·
Registered
Joined
·
5,488 Posts
Discussion Starter #16
Some New Mods added to the list.. New pictures as well this weekend.
 

·
Registered
Joined
·
250 Posts
Ive seen CA integrated taillight alot on here is that the Clear Alternatives brand, im pretty sure it is but i wanna make sure what a good brand it before i buy it. It seems that alot are using the same rear integraded kit and im assuming cuz its quality made and fits well over other brands???
 

·
Registered
Joined
·
5,488 Posts
Discussion Starter #19
yeah it's the CA Taillight, very easy to install and works perfectly!
 
1 - 20 of 193 Posts
Top