Honda CBR 600RR Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
Greetings,

I’m having a strange issue with my speedometer that I’m hoping someone can help me out with. I have a stock 2007 600RR digital gage that worked fine until recently. I think the gage works fine at low speeds (0-10 or 15 MPH) but anything higher than that I get wildly inaccurate readings. Around the actually speed or 45 MPH my speedometer will say that I’m doing 86+ MPH, at actual speed of 55MPH my speedometer will say that I’m doing 108+ MPH. All other gage functions (Gas, time, ect) give the correct readings. The only recent event that took place was that I bled my break lines, and replaced the DOT 4 fluid but never touched anything other the break bleeder nipples.

Do I need to recalibrate the speedometer? Can I even do that as the owner?

Any ideas would be greatly appreciated.

Thanks very much,
Ken
 

·
Registered
Joined
·
5,230 Posts
check the pickup/connector (s) at the at both ends.

sounds like a loose connection......

no way to calibrate factory speedo w/o aftermarket equip.
 

·
Registered
Joined
·
3 Posts
Discussion Starter #3
Hey, thanks for the suggestion. I checked the connection and everything was good to go and water tight. I was able to get the issue resolved by disconnecting the battery and resetting the ECU. After that everything came back fine. Weird huh? Well at least it was an easy fix. Until the next issues. :)

Thanks again
 
1 - 5 of 5 Posts
Top