[jeffRRy]

I'm trying to get the factory stickers off of the swingarm so I can put some .NET stickers on each side.... anyone have good remedies for getting the stickers and residue off of the swingarms??? Any pics of the .NET stickers on the swingarms??? Thanks guys!

 

[bobbyp600rr]

WD-40, wet rag, soapy water, rinse. In that order.

 

[SLAPS808]

pee on it!

 

[KhMeRGuY978]

i peeled it off after it sat in the sun for a while. it was pretty hot out but it came right off. i did it pretty fast, and then i used some good adhesive remover and it came right off.

 

[tougebear]

If it's still on, use a Scotch sticker remover pen. All you do is write over it and it will slowly peel off. Then wipe any remaining residue with a wet towel.

Prying it off really slowly works too. That's what I did on mine except for the chain tension sticker. Goo Gone works on the remaining residue though.

 

[jeffRRy]

Thanks guys!

 

[HomegrownPerformance]

carb/choke cleaner works really well also for any sticker residue

 

[sampsonvr6]

hair dryer------ gooo gone works wonders i took all my decals off this way

 

[Downforce137]

Pressure washer

 

[teleinfoncarr]

bug and tar remover gets them off easy

 

[mikespike2]

Wd-40 is good for cleaning things carb cleaner may take the paint off, like rims.

 

[shiftn3rdon1]

Use a heatgun. Works like butter. Then, if there is any residue, use some GooGone or carb cleaner.