Honda CBR 600RR Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
401 Posts
Discussion Starter #1
Ok, so im taking the bike apart to put on all my new stuff, after my get off 2 weeks ago, and i notice that the radiator has a L shaped bracket on it that conects to the lower part of the airduct. the little plastic stay that keeps it attached was missing and the bracket was bent. I had a spare stay, so i tried to staighten the L bracket that is rivited to the radiator, and geuss what, that focker snaped right off. Now I have 2 little rivit holes in my radiator.
Do you think a radiator shop can fix this and put that back on?
 
H

·
Guest
Joined
·
0 Posts
in general you can fix just about anything.... you should check with the shop and see if the fix will allow the radiator to maintain it integrity... sometimes repairs compromise the component....
 

·
Registered
Joined
·
492 Posts
i dunno about radiator repairs. sometimes on cars it is cheaper to replace than to repair. check with a radiator shop and see if they work with **** that small
 

·
Registered
Joined
·
492 Posts
are they metal or plastic? I have tried to jb weld a radiator for a civic and it didnt work too well.
 

·
Registered
Joined
·
492 Posts
**** it put a egg in there and maybe itll seal.
 
1 - 8 of 8 Posts
Top