Honda CBR 600RR Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
3,308 Posts
Discussion Starter #1
I am getting a "clunking," loose bolt sound when loading the suspension/standing the bike up.
Cannot seem to isolate the spot with help.
Im preparing to start checking everything with torque wrench.
Any suggestions before I see the suspension guy?
 
D

·
Guest
Joined
·
0 Posts
Is this coming from the front suspension? Do you also hear it when you hit bumps at a relatively slow speed when you have no wind noise?
 

·
Registered
Joined
·
3,308 Posts
Discussion Starter #3
It sounds like its towards the rear, but then to mid.
Swingarm? Checked the nut behind shift link and it was snug.
 
D

·
Guest
Joined
·
0 Posts
Push down on the rear seat and see if you can pin point where the noise is coming from. Maybe it's the spring rotating slightly or moving on the shock.
 

·
Registered
Joined
·
3,308 Posts
Discussion Starter #5
I hope its only the spring. Will check it.
If I load it from the rear it does it about as frequently as standing it up...about every other.
 
1 - 5 of 5 Posts
Top